Cane Detectable (ADA Compliant) Tofino™ E-Rack
No Scratch® Charging E-bike Rack
Drawings & Downloads
NEED HELP? 888-661-0555 / M-F: 7AM - 4PM PACIFIC
The Sportworks Tofino™ E-Rack integrates two charging outlets for E-bikes into the modern aesthetics and superior functionality of the original Tofino design. Optimized for easy installation and simple electrical connection, the Tofino E-Rack offers the fastest deployment of E-bike charging racks. The E-Rack includes the Sportworks No Scratch bumper that protects bikes and is intuitive for cyclists to use.
Designed with safety and security in mind, the horizontal rack is compatible with U-locks to secure both the wheel and frame of the bicycle – compliant with APBP standards to prevent theft. The rectangular cross-section of the rack is vandal-resistant, further enhancing theft prevention. Tofino offers high space efficiency for two bikes in sidewalk settings, campuses, city parks, or anywhere space is limited. UL-listed electrical outlets on the rack frame keep charging cables close to the bicycle, supporting organized parking.
The Tofino is available in stainless or mild steel, and comes in a variety of mounting and coating options.
For ADA-compliant use in circulation paths as defined by ADA 2010 Section 307.3, please see our Cane Detectable Tofino No Scratch® bike rack.
Finishes
Sportworks bike parking products are available in a wide variety of finishes and materials. Please contact us for specific details regarding minimum lot size charges on finishes.
Bead Blast
Unlike powder coating and galvanizing, this finish removes material during the application process, and is ideal for stainless steel racks. Small glass particles (media) traveling at high velocities impact the metal removing the outer surface, and resulting in a mildly-textured or matted finish. Similar to galvanizing, there are no color options available for this type of finish. Sportworks stainless steel bike racks represent the highest level of corrosion protection available.
Materials
Stainless Steel
Stainless steel does not stain, corrode, or rust as easily as mild steel because it contains more chromium and nickel. A passive film of oxides prevents surface corrosion and blocks corrosion from spreading into the internal structure of the metal. Stainless steel can still corrode and discolor in certain environments, however the strength and appearance can withstand exposure in most outdoor locations.
Mounting Options
Complete installation instructions for all Sportworks bike parking products are available as a PDF on this page or by visiting the downloads section of the website.
To provide power for charging, each E-rack installed should be connected by a licensed electrician to a dedicated 20-Amp GFCI circuit. The Tofino E-Rack is the fastest and easiest at making this connection
Surface Mount
Surface mount uses permanent or removable anchors to secure the bicycle rack mounting flange to concrete.
Rail Mount
Rail mount secures a series of bicycle racks to metal rails. Rail mounts reduce the installation time when multiple bicycle racks are needed in the same location. Additionally, the user can leave the rails unsecured and manipulate the bicycle racks when necessary to support sidewalk clearing or cleaning.
Fastener Options
Concrete Wedge Anchor
Concrete Wedge Anchors, 3/8” Diameter x 3.75” Length, Stainless Steel, with 3/8-16 Hex Nut
Asphalt Anchor
Asphalt Anchor, 12” Length, Epoxy in Ground, Includes Epoxy, Hex Head Bolt 3/8”-16 x 2.5” Length and Washer
Tamper Resistant Anchors
Tamper resistant anchors are recommended for surface mounted racks. When the substrate is concrete, we recommend stainless steel wedge anchors with stainless steel breakaway nuts, also known as shear nuts. These nuts make it much more difficult for someone to tamper with or remove an installed bicycle rack.
Breakaway Nut Pre Installation
The breakaway nut consists of a hex nut portion at the top and a smooth conical sleeve located just below. Install the wedge anchor using standard tools and then tighten the breakaway nut.
Breakaway Nut Installed
The hex portion of the nut will shear off when the design shear torque is exceeded. Once the hex nut shears off, only the smooth conical sleeve will remain. The tamper resistant anchor is now installed. The cone is shaped so standard tools will not be able to grip and remove the nut.
Green Certifications
At Sportworks, we take environmental responsibility very seriously. Our bike racks are made with post-industrial recycled steel. We trace the location of origin and material/chemical composition of all the raw materials and sourced components we use. We also monitor VOC content in our finishing materials, and use recycled content in our packaging materials.
Installation of Sportworks bike racks may assist your project in qualifying for the following green building certification programs:
LEED®
SS Credit 4.2-Alternative Transportation-Bicycle Storage and Changing Rooms
To qualify for this credit, commercial, institutional or residential buildings must provide secure bicycle parking within 200 yards of a building entrance.MR Credit 4.1—Recycled Content—10% | MR Credit 4.2—Recycled Content—20%
Sportworks stainless steel bicycle racks average 87% total recycled content; 72% post-consumer recycled content; 15% pre-consumer (post-industrial) recycled content.MR Credit 5.1—Regional Materials—10% Extracted, Processed & Manufactured Regionally | MR Credit 5.2—Regional Materials—20% Extracted, Processed & Manufactured Regionally
Our manufacturing facility is in Woodinville, Washington. If your project is within 500 miles of our factory, you may qualify for these credits.
Green Globes™
Sportworks bike racks can help you qualify for the following Green Globes™ credits:
E.2—Minimal Consumption of Resources
Sportworks racks are made with recycled content and may be considered locally manufactured depending on the location of your project in relation to our factory in Woodinville, Washington.C.5—Energy Efficient Transportation
Sportworks racks support the requirement of providing safe storage areas with fixed mountings for bicycles.
Related Products
Westport™ No Scratch® Bike Rack
Compact design for indoor or outdoor use. The No Scratch® bumper to keep bicycles damage-free. ADA-compliant and made in the USA of 87% recycled materials.
Oahu™ No Scratch® Bike Rack
Unique circular design with a No Scratch® bumper to keep bicycles damage-free. Optimal for indoor or outdoor use. Made in the USA of 87% recycled materials.
Mounting Rails
Combine multiple inverted-U racks into a single unit that parks 6-10 bikes. These rail mounted units are ideal for surfaces that do not accept ground anchors.
Plaza™ High Density Bike Rack
The Plaza™ bike rack is designed to provide high density, organized bike parking, all within a space efficient footprint. Supports up to 12 bikes, single and double-sided configurations are available.
Vertical+™ No Scratch® Floor Mount Bike Rack
The floor mount vertical bike parking system that allows for endless configurability complete with our one-of-a-kind No Scratch bumper.
Custom Sign Plates and Colors
Custom sign plates are available for some Sportworks bike parking racks. Sign plates can either have a cut-out or a chemical laser marking done to create your custom bike rack. Colored powder coating is available for most bike racks.